Menu
PRODUCTS+ Products
产品名称

PN.R-2005 REFINISH ULTRA PLUS__ONE STEP COMPOUND

发布时间 2019-01-28
点击次数 40

Item number : PN.R-2005

Common Uses : All exterior vehicle surfaces which can be polished.

Net content : 250ml, 500ml,1000ml

Theory of REFINISH ULTRA PLUS:



PN.R-2005 REFINISH ULTRA PLUS__ONE STEP COMPOUND

PN.R-2005 REFINISH ULTRA PLUS__ONE STEP COMPOUND

Diagram 1     Diagram 2


Polishing compounds have been developed over the years in order to achieve low operation time and increase performance. As illustrated in diagram 1, polishing compounds have developed its way from 1st generation to the 4th generation at present.

The particles of the 1st generation compound have been developed in irregular shape, but it was easily broken during paint correction, consequently it has caused micro damages to the paint surface. The size of the particle in 1st generation varied between 70~20µm. Detailers required to work on each panel step by step, in what we now call “the traditional polishing style”, from aggressive and move on to fine which may involved three to four stages and consists of a few bottles of compounds. However, detailers may still face swirl marks on the surface.

From the issue encountered with 1st generation, manufacturers have then developed the 2nd generation compound in order to prevent the abrasive damaging the paintwork during break down. The 2nd generation compound adopted an octagon shape, which varied between 20 to 2µm. The polishing time and measures were still the same as the 1st generation, but swirl marks were not created easily during paint correction.

Both 1st and 2nd generation polishing compounds were oil-based. When most of the manufacturers were still producing 2nd generation compounds, TACSYSTEM has begun to evolve the development of the 3rd generation compound, water-based; The Refinish Series, R1 R2 and R3. These compounds are in the shape of a tetrahedron, from two dimensions will appear a shape of a triangle. This innovative design creates a much stronger cutting force then the past generations of the polishing compound. The cutting force of the Refinish series decreases when water dries out during the polishing progress. Refinish series consists of resins, which will wrap around the particles when the water dries out, thus there will not be any marring caused to the surface. The work time and performance of Refinish series as shown in diagram 2. The progress of paint correction still consists from two to three stages with this generation, but outcome were remarkable shinny and time consumption during paint correction were reduced significantly.

In 2015, TACSYSTEM has instigated an upgrade to our Refinish Series, we have formed yet another revolution to the polishing compound, Refinish Ultra, patented in Korea. It is developed in the shape of a half-moon, which is only 2.2µm in size, and it has a unique aggressive cutting force, yet it allows extreme high gloss in the finishing step.

In 2018, in order to increase the work efficiency, TACSYSTEM has increased the cutting force basic on the Refinish Ultra. TACSYSTEM has launched Refinish Ultra Plus. It is developed in the shape of a irregular star-shape, the size of particles are only 2.2µm. With such size of particles, it can prevent swirl marks creating during the polishing stages and at the same time increases the shininess of the surface.


PN.R-2005 REFINISH ULTRA PLUS__ONE STEP COMPOUND

Product Description:

TACSYSTEM Refinish Ultra Plus Compound is an All-In-One (AIO) product that combines extreme cutting, superb finishing and extreme gloss for surface!

 

Product Benefits:

Refinish Ultra Plus has the ability to remove 600~12000 grit sanding scratches, heavy topical defects, medium-heavy water spots, heavy swirl marks and medium-heavy scratches. Ultra produces super high gloss while leaving minimal marring behind for any follow up paint correction steps. Refinish Ultra Plus is a low dusting, silicone free, and body shop safe product.


 PN.R-2005 REFINISH ULTRA PLUS__ONE STEP COMPOUND

Warnings:

For best performance, please avoid working under direct sunlight, and heated paint surfaces. DO NOT allow Refinish Ultra Plus to dry on surfaces. Use ONLY on Cool vehicle exterior surfaces. If comes into contact with skin, rinse well with water. Always wear respirator & gloves during use. If it comes in contact with eyes, rinse immediately and seek medical care.


Directions:

1. Shake product well before using.

2. Start with a new or clean pad. Used or dirty pads may obtain contaminants that can scratch the surface.

3. Distribute product evenly over the pad surface to ensure all portions of the pad are ready for correction.

 

Tips / Alternate Uses:

Refinish Ultra Plus can be used with Rotary or Dual Action Polishers, or by hand. Clean pads often for best results. Dirty pads being to scour paint when filled up with too much paint residue from the correction process.


PN.R-2005 REFINISH ULTRA PLUS__ONE STEP COMPOUND

-Keep bottle tightly closed after used and store in cool dry space.

-Keep product out of reach from children.

-Wear suitable gloves. If comes into contact with skin, rinse well with water.

-If it comes in contact with eyes, rinse immediately and seek medical advice.

-Do not drink! If swallowed, consult a doctor immediately and show product container and label. 

 









分享至:
Hot Products / 热卖产品 More
2016 - 10 - 09
Item number: PN.Q 1280Net content : 50ml SETCommon Uses: Professional car body quartz coating for all kinds of colors.Included:50ml bottle Base Coat x150ml bottle Top Coat x 1Micro fiber suede applicators x 6Large micro fiber suede towel x 1Durability/Specs: 5 years. (Application includes one layer for base coat, one layer for top coat) The base layer is applied with 0.6um thickness. ...
2016 - 10 - 11
Item Number: PN.H-4211Net Content: 100mlCommon Uses: Stand alone LSP for painted surfaces, or as a topper to TacSystem coatings after full curing.Included: 1x TOP COAT 1.0 100ml5x Suede 10cm x 10cm1x Suede 30cm x 30cm1x Coating BlockDurability/Product Specs: 1year.   Product Description: Top Coat 1.0 is a durable, glossy, and hydrophobic semi permanent layer desi...
2016 - 10 - 11
Item number: PN.Q-1290Net content: 30ml / 50mlCommon Uses: Painted surfacesIncluded:1x Quartz Sparkle 5x Suede 10cm x 10cm1x Suede 40cm x 40cm1x coating blockDurability/Specs: 3 years. Measurable thickness: 0.6um. SiO2 concentration: 90%    Product Description: Quartz Sparkle Plus is a premium glass coating offering the highest protection and durability to your veh...
2016 - 11 - 25
Item Number : PN.C-12050Use : Glossy coating film to form a strong acid rain, UV from the superior protectionContent : 150ml,500ml     Ceramic Coat is TACSYSTEM’s Premium Polymer Sealant, a type of coating but can be easily applied, in especially made for DIY purpose. Ceramic Coat produces a deep, rich luster and glossy coating film, which enhances the water repellenc...


86 20 37155632   82 61 7557124
tacsjc@naver.com  tacglobal@naver.com
TACSYSTEM (KOREA) Corp.
Copyright ©1995 - 2017 TACSYSTEM (KOREA) Corp.
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

5

电话号码管理

6

二维码管理

展开