PRODUCTS+ Products


发布时间 2016-10-11
点击次数 190




Item number : REFINISH3

Common Uses : All exterior vehicle surfaces which can be polished.

Net content : 250ml, 1000ml



Theory of Refinish Series


  Diagram 1


  Diagram 2

As highlighted by Figure 1, the polishing compounds have developed the style of the abrasive from its original irregular shape that easily crumbled during polishing work times. The issue with these broken abrasive pieces was often damage to the paint surface. The size of this first generation polishing compounds varied between 70~20µm. when operating on the paint surface, for best performance, the user needed to use from big sized particles to the small particles sequentially. If did not apply step by step from the small size polishing compound as the last step, there will left big swirl marks on the paint work. But even so, it still difficult to clean the swirl mark perfectly. The second generation of polishing compound adopted an octagon shape. Developed accordingly to prevent the abrasive from breaking and damaging the paint surface during the polishing time. The size of the abrasive of the second generation polishing compound varied between 20 to 2µm, and was also required to be used sequentially, in order to remove the swirl marks. However, as with the previous generation it had difficulty for removing the swirl marks clean.

The first and second generation polishing compounds are oil-based, and many other companies have not developed beyond this second generation stage. TAC has manufactured the third generation of polishing compound, the series of Refinish 1, 2 and 3. R1, 2 and 3 are using on the water-based paint surface and have adopted a tetrahedron shape for the abrasive. If taken from the front, it looks triangle in shape. This innovative design creates a stronger cutting force then the past generations of the polishing compound. The cutting force of Refinish series will decrease until the water dries out, eventually becoming zero. There are resins contented in the R1, 2, and 3, at the point in time for water dries out, the solvent will come out and the resin will enclose all around the triangles, let them become smoothly and do not hurt the paint surface, shown as in the picture 2.



Why your car needs polishing?

In the picture 3 we can see that, there are three basic layers of the paint surface, the primer layer, color layer and the clear coat. When there is dirt, scratches, and other contaminants on it, the paint surface will not so glossy. Usually these scratches, dirt and contaminants are on the clear coat. When our eyes accept more reflected rays from the surface, then it is more shine. After polishing work, the surface will become clean and smooth, therefore the direction of most reflection lights will be same, and from visual perception it is glossy.

Usually the scratches are on the clear coat, after polishing work will remove them. Of course some scratches have hurt the color layer, if so you should take other steps.



Product Description: 

TacSystem’s Refinish 3 is formulated polishing and glazing compound especially for water based paintwork. Refinish3 produces an extreme gloss finish and it can be remove fine swirl marks holograms. Refinish 3 finest polish for all paint finishing needs. While it was designed as a polish, R3 can tackle much heavier defects than traditional polishes. Refinish3, as a finish polish, leaves a surface free of fine defects and micro-marring and leaves paint super glossy and reflective.


Product Benefits:

Refinish 3 is a paint correction polish formulated with non-diminishing abrasives of both natural resin and highly durable silica particles. Refinish 3 has the ability to remove 2500grit sanding scratches, light topical defects, light water spots, swirl marks and light scratches. Refinish 3 also enhances the level of gloss during the paint correction process. Refinish 3 is a low dusting, silicone free, and body shop safe product.







1. Shake product well before using.

2. Start with a new or clean pad. Used or dirty pads may obtain contaminants that can scratch the surface.

3. Distribute product evenly over the pad surface to ensure all portions of the pad are ready for correction.



Tips / Alternate Uses:

Refinish 3 can be used with Rotary or Dual Action Polishers, or by hand. Clean pads often for best results. Dirty pads being to scour paint when filled up with too much paint residue from the correction process.




-Keep bottle tightly closed after used and store in cool dry space.

-Keep product out of reach from children.

-Wear suitable gloves. If comes into contact with skin, rinse well with water.

-If it comes in contact with eyes, rinse immediately and seek medical advice.

-Do not drink! If swallowed, consult a doctor immediately and show product container and label. 



If you are interested in this item, please contact us by email.

Or if you have any questions or needs about our products, please contact us at any time.

We are also going to export this product all over the world.

Hot Products / 热卖产品 More
2016 - 10 - 09
Item number: PN.Q 1280Net content : 50ml SETCommon Uses: Professional car body quartz coating for all kinds of colors.Included:50ml bottle Base Coat x150ml bottle Top Coat x 1Micro fiber suede applicators x 6Large micro fiber suede towel x 1Durability/Specs: 5 years. (Application includes one layer for base coat, one layer for top coat) The base layer is applied with 0.6um thickness. ...
2016 - 10 - 11
Item Number: PN.H-4211Net Content: 100mlCommon Uses: Stand alone LSP for painted surfaces, or as a topper to TacSystem coatings after full curing.Included: 1x TOP COAT 1.0 100ml5x Suede 10cm x 10cm1x Suede 30cm x 30cm1x Coating BlockDurability/Product Specs: 1year.   Product Description: Top Coat 1.0 is a durable, glossy, and hydrophobic semi permanent layer desi...
2016 - 10 - 11
Item number: PN.Q-1290Net content: 30ml / 50mlCommon Uses: Painted surfacesIncluded:1x Quartz Sparkle 5x Suede 10cm x 10cm1x Suede 40cm x 40cm1x coating blockDurability/Specs: 3 years. Measurable thickness: 0.6um. SiO2 concentration: 90%    Product Description: Quartz Sparkle Plus is a premium glass coating offering the highest protection and durability to your veh...
2016 - 11 - 25
Item Number : PN.C-12050Use : Glossy coating film to form a strong acid rain, UV from the superior protectionContent : 150ml,500ml     Ceramic Coat is TACSYSTEM’s Premium Polymer Sealant, a type of coating but can be easily applied, in especially made for DIY purpose. Ceramic Coat produces a deep, rich luster and glossy coating film, which enhances the water repellenc...

86 20 37155632   82 61 7557124
Copyright ©1995 - 2017 TACSYSTEM (KOREA) Corp.