Menu
PRODUCTS+ Products
产品名称

REFINISH1 POLISHING COMPOUND

发布时间 2016-10-11
点击次数 240

REFINISH1  POLISHING COMPOUND

 

 

 

Item number : REFINISH1

Common Uses : All exterior vehicle surfaces which can be polished.

Net content : 250ml, 1000ml

 

 

Theory of Refinish Series

REFINISH1  POLISHING COMPOUND

  Diagram 1

REFINISH1  POLISHING COMPOUND

 


  Diagram 2

The particles of the 1st generation compound have been developed in irregular shape, but it was easily broken during paint correction, consequently it has caused micro damages to the paint surface. The size of the particle in 1st generation varied between 70~20µm. Detailers required to work on each panel step by step, in what we now call “the traditional polishing style”, from aggressive and move on to fine which may involved three to four stages and consists of a few bottles of compounds. However, detailers may still face swirl marks on the surface.

 

From the issue encountered with 1st generation, manufacturers have then developed the 2nd generation compound in order to prevent the abrasive damaging the paintwork during break down. The 2nd generation compound adopted an octagon shape, which varied between 20 to 2µm. The polishing time and measures were still the same as the 1st generation, but swirl marks were not created easily during paint correction.

 

Both 1st and 2nd generation polishing compounds were oil-based. When most of the manufacturers were still producing 2nd generation compounds, TACSYSTEM has begun to evolve the development of the 3rd generation compound, water-based; The Refinish Series, R1 R2 and R3. These compounds are in the shape of a tetrahedron, from two dimensions will appear a shape of a triangle. This innovative design creates a much stronger cutting force then the past generations of the polishing compound. The cutting force of the Refinish series decreases when water dries out during the polishing progress. Refinish series consists of resins, which will wrap around the particles when the water dries out, thus there will not be any marring caused to the surface. The work time and performance of Refinish series as shown in diagram 2. The progress of paint correction still consists from two to three stages with this generation, but outcome were remarkable shinny and time consumption during paint correction were reduced significantly.

 

REFINISH1  POLISHING COMPOUND

Why does your car need polishing?

Firstly, one must understand that there are two normal paint systems for most of the car manufacturer around the world. The usual paint system consists of three basic layers; the primer layer, colour layer and the clear coat. The clear coat keeps the car protected in a shinny layer. If this layer is contaminated or covered by dirt, grime and scratches, the reflection of car is significantly reduced and outcome in dullness and less attractive, as shown in Picture 2.

 

Thus, the reason that your car needs polishing is to remove the defects on the clear coat that might have been caused by different environmental factors. Otherwise, dirt will build up and some contaminants might be corrosive which can damage permanently if not handled in timely fashion. Other than dirt, scratches are one of the main factors that affect the shininess of the vehicle, and considerably owner has chosen the wrong place to wash their car or incorrect choice of car care products! In order to remove the contaminants and scratches, detailers require different car care products and might consists of a certain hours for paint correction to achieve highest glossiness on the paint surface.

 

 

 

 

 

REFINISH1  POLISHING COMPOUND

 

Product Description: 

TacSystem Refinish 1 is designed specifically used for intensive paint corrections on all types of paintwork in especially water-based paint. Refinish1 is an ultra-cut paint correction compound, which can effectively restore highly oxidated surfaces, water spots, and deep scratches while also finishing down impressively well with a very high gloss.

 

 

Product Benefits:

R1 is formulated with non-diminishing abrasives of both natural resin and highly durable silica particles. The result is super strong cutting power, capable of removing 600 grit sanding scratches, heavy topical defects, medium-heavy water spots, heavy swirl marks and medium-heavy scratches. R1 produces super high gloss while leaving minimal marring behind for any follow up paint correction steps. R1 is a low dusting, silicone free, and body shop safe product.

 

 

 

 

  

REFINISH1  POLISHING COMPOUND

 

Warnings:

For best performance, please avoid working under direct sunlight, and heated paint surfaces. DO NOT allow Refinish 1 to dry on surfaces. Use ONLY on Cool vehicle exterior surfaces. If comes into contact with skin, rinse well with water. Always wear respirator & gloves during use. If it comes in contact with eyes, rinse immediately and seek medical care.

 

 

Directions:

1. Shake product well before using.

2. Start with a new or clean pad. Used or dirty pads may obtain contaminants that can scratch the surface.

3. Distribute product evenly over the pad surface to ensure all portions of the pad are ready for correction.

 

Tips / Alternate Uses:

Refinish 1 can be used with Rotary or Dual Action Polishers, or by hand. Clean pads often for best results. Dirty pads being to scour paint when filled up with too much paint residue from the correction process.

 

 

 

 

REFINISH1  POLISHING COMPOUND

 

-Keep bottle tightly closed after used and store in cool dry space.

-Keep product out of reach from children.

-Wear suitable gloves. If comes into contact with skin, rinse well with water.

-If it comes in contact with eyes, rinse immediately and seek medical advice.

-Do not drink! If swallowed, consult a doctor immediately and show product container and label.

 

 

 

 

If you are interested in this item, please contact us by email.

Or if you have any questions or needs about our products, please contact us at any time.

We are also going to export this product all over the world.

 

 

 

 


 

分享至:
Hot Products / 热卖产品 More
2016 - 10 - 09
Item number: PN.Q 1280Net content : 50ml SETCommon Uses: Professional car body quartz coating for all kinds of colors.Included:50ml bottle Base Coat x150ml bottle Top Coat x 1Micro fiber suede applicators x 6Large micro fiber suede towel x 1Durability/Specs: 5 years. (Application includes one layer for base coat, one layer for top coat) The base layer is applied with 0.6um thickness. ...
2016 - 10 - 11
Item Number: PN.H-4211Net Content: 100mlCommon Uses: Stand alone LSP for painted surfaces, or as a topper to TacSystem coatings after full curing.Included: 1x TOP COAT 1.0 100ml5x Suede 10cm x 10cm1x Suede 30cm x 30cm1x Coating BlockDurability/Product Specs: 1year.   Product Description: Top Coat 1.0 is a durable, glossy, and hydrophobic semi permanent layer desi...
2016 - 10 - 11
Item number: PN.Q-1290Net content: 30ml / 50mlCommon Uses: Painted surfacesIncluded:1x Quartz Sparkle 5x Suede 10cm x 10cm1x Suede 40cm x 40cm1x coating blockDurability/Specs: 3 years. Measurable thickness: 0.6um. SiO2 concentration: 90%    Product Description: Quartz Sparkle Plus is a premium glass coating offering the highest protection and durability to your veh...
2016 - 11 - 25
Item Number : PN.C-12050Use : Glossy coating film to form a strong acid rain, UV from the superior protectionContent : 150ml,500ml     Ceramic Coat is TACSYSTEM’s Premium Polymer Sealant, a type of coating but can be easily applied, in especially made for DIY purpose. Ceramic Coat produces a deep, rich luster and glossy coating film, which enhances the water repellenc...


86 20 37155632   82 61 7557124
tacsjc@naver.com  tacglobal@naver.com
TACSYSTEM (KOREA) Corp.
Copyright ©1995 - 2017 TACSYSTEM (KOREA) Corp.
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

5

电话号码管理

6

二维码管理

展开